Piping Path StudioTHE UPHOLSTERY WORKBENCH

DESIGN · MEASURE · CUT

Measure the edge.
Master the finish.

A visual upholstery piping calculator & fabric cut planner.
For cushions, chairs and the details that make them yours.

01 / WORKROOM TOOLS

Draw the edge.
Plan the piping.
Cut with confidence.

No signup. All calculations stay in your browser.

Your piping workbench

1 Shape settings

Select edges below or tap the drawing. Each edge includes half of its adjacent corner arcs.

Allowances & fabric

2 Live path preview

SEAM-LINE VIEW
— Selected piping┄ Bottom / unselected

Click the four edge controls for keyboard-accessible selection. Marker: suggested back join. Preview is proportional, not a full-size pattern.

02 / MATERIAL PLANNING

A cutting plan you can follow.

Schematic layout · diagonal end scraps excluded · one strip-width lost per 45° join.

Join on the back, away from tight corners. Open the covering, overlap the cord ends, then trim only after checking the fit.

Workshop checklist

1. Confirm seam-line dimensions → 2. Cut and join strips → 3. Test wrap width → 4. Cover cord → 5. Attach from the back join.

03 / THE MAKER’S GUIDE

Good piping starts with a good plan.

01

Measure the seam, not the fabric.

Enter the finished seam-line width and depth. For a rectangle, perimeter = 2 × (width + depth). Rounded corners replace straight segments with arcs: 2(W + D) − 8r + 2πr. A circle uses π × diameter. Radius is limited to half the smaller dimension.

02

Cord and fabric are different quantities.

Cord = (selected seam paths + allowance for every independent run) × reserve factor. Strip width starts at π × cord diameter + two seam allowances + wrap adjustment. This is a starting estimate: compressibility and fabric thickness change the fit.

03

Straight grain or bias?

Straight strips suit gently curved or straight edges and preserve directional patterns. Bias strips bend more easily around tight curves. The planner compares usable joined lengths, not just fabric area. Pattern matching, selvedges and nap may require more fabric.

From measurement to materials.

60 × 55 cm rounded cushion

Radius 5 cm, both faces: 4.43 m seam path. Add 10 cm per loop and 8% reserve: prepare 5.00 m cord.

40 cm round chair seat

One face: 1.257 m seam path. With a 10 cm end allowance and 8% reserve, prepare 1.47 m cord.

Three 50 × 50 cm cushions

Both faces: 12 m seam path, six separate loops. Add 60 cm total allowances and 8% reserve: 13.61 m cord.

04 / COMMON QUESTIONS

Before you make the first cut.

Are piping and welt cord the same?

In upholstery, piping or welting usually means cord wrapped in a fabric strip and sewn into a seam. Welt cord refers to the inner cord; this planner separates cord length from covering fabric.

Does the plan include pattern matching?

No automatic pattern matching is applied. Directional fabrics receive a reminder. Add fabric for repeat alignment, nap direction and unusable selvedges. Bias estimates assume non-directional woven fabric.

Can I save a PDF or a project?

Generate cut sheet opens your browser print dialog; choose Save as PDF. Save project stores the current inputs locally in this browser. Clearing browser storage removes saved projects.

Can I trace a photograph or mix cushion sizes?

This version supports geometric shapes and repeated cushions of one size. Photo tracing, free curves and mixed-size nesting are not included. Measure irregular furniture directly and calculate separate plans.

Cord to prepare — ↑